Home>News & Events>Boiler Knowledge>Safety Instructions for Using Oil-fired Hot Water Boilers

Safety Instructions for Using Oil-fired Hot Water Boilers

If you are interested in our products, Please get in contact with us .

E-mail: manager@boilermanufactory.com Chat Line Send Inquiry
In the process of using oil-fired hot water boilers, certain operating specifications must be followed to ensure the safety of the boiler and operators. So, how can we ensure that the oil-fired hot water boiler will not be abnormal when it occurs?

1. Guarantee the water quality of the fuel-fired hot water boiler

       For example, the quality of soda water during normal and operation is qualified, etc., to reduce scaling and corrosion in the water wall tubes, and to strengthen the supervision of boiler water quality. When it is found that the water quality of the boiler is unqualified, the number of scheduled discharges should be increased; at the same time, the flow rate of flue gas, especially the flue gas flow rate at the flue gas corridor, should be controlled. During installation and maintenance, the distance between the superheater tubes and the wall should also be minimized, and the distance between the tubes should be as equal as possible.

2. The fuel-fired hot water boiler should strictly follow the regulations when heating up and raising the pressure.

       For example: control the boosting speed, carry out the sewage discharge work of the lower header of the water wall according to the regulations, establish the water circulation as soon as possible, switch the oil gun in time, ensure that the heating surface is heated evenly, prevent half-side burning, and eliminate thermal deviation.

3. Do a good job in the combustion adjustment of the oil-fired hot water boiler

       For example: prevent flame deflection, pay attention to control the fineness of pulverized coal, use air reasonably, prevent coking, reduce thermal deviation, and prevent reburning at the tail of oil-fired boilers; closely monitor main indicators such as boiler steam parameters, evaporation and water level to prevent over-temperature and overheating. Pressure, full water, water shortage accidents occur.

4. Strengthen the management of soot blowers and soot blowers

       For example: to prevent serious ash accumulation on the heating surface, when coking is found in the furnace, the frequency of soot blowing should be increased in time to ensure that the water-cooled wall absorbs heat well; for the heating surface with long-term overheating problems, add thermal temperature measuring points to supervise and control; Ensure that the expansion indicator is accurate.

Finally, TATA Boiler would like to emphasize to everyone that units using oil-fired hot water boilers must fully consider the safety of the boilers, and must be meticulous when checking the operating conditions of the boilers.

Hot Products

CONTACT TATA

Get Latest Price

We guarantee that your information will not be divulged to third parties and reply to you within 24 hours.

If you need the latest price list, please leave us a message here, thank you! We guarantee that your information will not be divulged to third parties and reply to you within 24 hours. Tell us your needs, there will be more favorable prices!

  • Your Name
  • Your Email
  • Your Phone/Whatsapp*
  • Ton/Capacity*
  • Product Name
  • Fuel Name
  • Requirements(as specific as possible)